Performance Specifications

for Typical Fiber Optic Sub-Systems
 

                      PARAMETERS                                             SPECIFICATIONS
Frequency Range <5.4 Ghz to >5.9 Ghz
Total Delay 1 16 usecs +/-200 psecs to 67 usecs
Insertion Loss 0 dB
Amplitude Flatness < +/- 0.25 dB
Triple Transit  Not Measurable
Impedance 50 ohms
Input VSWR < 1.7:1
Output VSWR < 1.5:1
Input 1 dB comp 0 dBm
Noise Figure +24 dB
RF Connectors SMA
Maximum RF Input Power (ave)                                                     +27 dBm
System Input Power +18 to +48 volts DC, 1 amp., typical +24VDC    
Environment
          operating temp range
          storage temp range

-25 to +50ø C
-40 to +80ø C
SFDR (1 Mhz noise bw) > 30.46 dBc
Output noise floor (With 50 ohm input term) < -70.82 dBm/MHz
Minimum detectable signal < -70.82 dBm
Results of two tone test (Carriers at 0 dBm) >13 dBc
Results of two tone test (With carriers at -10 dBm) >34 dBc
2nd order harmonic term (0 dBm input) >31 dBc
2nd order harmonic term (-10 dBm input) >45.73 dBc
22. Phase Linearity +/- 2. 2degrees
23. Group Delay +/- 192 psec
24. Enclosure 15.5" x 9.0" x 4.7" (RFI sheilded)